Valentines Day wouldn’t be complete without a festive shirt for what I like to call, Love Day! And there is nothing more lovely than sporting big red heart on your chest. Check out the tutorial below!
Things you need:
Fold felt in half and sketch out a half heart with a pencil.
Keeping your felt folded cut out your heart. Open it up and you will have a full heart. Center and pin to your shirt. Sew into place with a needle and thread or on your sewing machine. The perfect shirt to wear this coming up Friday,Valentines Day!
It finally feels like winter in Texas! The weather has dropped so I have officially packed up all my summer clothing and un packed my sweaters. We usually have very mild winters so I don’t find myself buying sweaters often. The sweaters I own have been around for many years with very little use. I’ve been seeing these graphic sweaters and really wanted one but didn’t want to spend the money buying one. Here it may be cold one day and in the 70’s the next day. It makes it very confusing on what to buy so if I never pay full price for sweaters or just make the best out of my old ones. Or DIY one! So I thrifted a sweater for $2 bucks and bought some felt for $1 and crafted me a cow print sweater for $3 bucks! Check out the tutorial below:
First, cut all the shapes out of the felt. I used two sheets of felt but I only covered the front of my sweater. Use more if you want to add to the back and sleeves. This particular felt I found at Hobby Lobby, so if you have one in your town try there first. If not and you can’t find it at your local craft store try googling cow print and print it out. Then use that to trace out your shapes on plain black felt.
Next, place all your cut out pieces on your sweater in a design you like.
Add glue to the back of each piece and glue into place.
Press each piece down for a couple of seconds. When your finished gluing go back and double-check each piece to see if additional glue will be needed. Let dry for 24hrs.
Not bad for $3 dollars. It was actually pretty cold when I took this picture. It was drizzling and very cold. I was shivering in between shots. Thanks Blanc for getting a good shot!
Phillip Lim showcased these patchwork jeans in his winter 2013-14 collection and I must say he became my hero. Who would think that putting patches on your denim could look every so chic. I have had this on my, MUST DIY, list since February when he debuted his collection in NYFW. Check out how to DIY your own below!
Things you need:
Needle and thread (not pictured)
When shopping for your patches you might want to try your army surplus store. I found some of patches there and the others are flea market finds and iron on’s I bought at a craft store. Either kind will work too. Iron on or sew on it’s completely up to you. First, lay your patches out on your jeans in a pattern you like.
Using your stick pins, pin all your patches into place. Then take your needle and thread and start sewing them into place. If you purchased any that iron on follow the direction on the package to iron the patch in place.
Tadah! It’s really that simple. You can customize your jeans however you want by adding more or just a couple patches. Happy crafting!
Hello everyone! I Hope you all had a great Thanksgiving. Did you eat a lot of Turkey? I know I did! So today is re-fashion Monday, my DIY collab with Mo Mccray, where we bring you two great ways to spruce up and old article of clothing. This DIY is all about glitz, glam and sequins. Shopping for the perfect gift brings out the crazy shopper in us all but who can shop while wearing 3 inch hills. I am all for the coziness of a good old fashion sweat suit but I have to say they are not the most fashionable thing, until now! Check out how to glam up your sweat suit with sequins and then pop on over to see what Mo came up with! See the steps below!
Lay your pant flat with your pants side seam facing up. Just like if you were going to iron a crease in them. Starting at the waistband measure your trim all the way down to the ankle. Cut trim to fit.
Add fabric glue to the back and glue your trim center over the side seam. Do both pants legs.
Lay your sweat shirt flat.
Spread your material over the area that will be covered.
Use your sweatshirt as a guide and cut material to fit selected section. If you have some old newspaper around you can make an outline of the section that will be sequins, then use it has a pattern to cut your material.
Spread Fabric glue on the area your sequins piece will go and glue down. Make sure to go back around all the edges and use more glue if necessary.
Now the seamstress in me went back over all the trim with a needle and thread and sewed the trim into place.
Now I can be cozy and chic while doing my holiday shopping!
Hey guys! Long time no see! Work is crazy as usually but I was able to put together this quick DIY for you guys to check out. I thrifted this army jacket about a month ago and have been wanting to jazz it up a bit. Since the punk rock look so in right now I decided to stud it and give it a chic/punk upgrade! Check out the tutorial below!
Things you need:
Lets begin by add some studs to your collar. Starting at the corner of your collar take a cone stud and push the prongs through the fabric. The prongs should poke out of the back side of the fabric.
Holding the stud tightly against the fabric bend the prongs inward with your pliers to secure the stud.
Now add two more to form a triangle. Do this to both sides of your collar.
Above your army patch add a row of your pyramid studs.
Now on either side add a row of pyramid studs starting at the collar neckline all the way down to the arm seam. Keep adding lines of studs but decreasing by one creating a big to small effect.
Done! I like the finished effect but I don’t know if I should add studs to both sides don’t want to over do it…but what do you think?
My current obsession is graphic t-shirts. You can dress them up or dress them down it is an essential piece in my wardrobe right now! Recently I came across these eye chart t-shirts, you know the kind you have to squint and look at the eye doctor. But the only difference is that they have a hidden message in them and are not just for telling how blind you are. See what my eye chart reads below!
Things you need:
Iron on letters
Lay your shirt out flat. Then brain storm on what exactly you want to put on your shirt!
I chose BEAUTIFUL IN MY OWN SKIN. You can use mine or come up with one on your own click here for some more examples.
When you’ve come up with your text cut out the letters that will be used.
Arrange you letters on your shirt. Start with the first letter of your saying followed by two more letters then three, four etc….. Read and follow the instructions for your letters. Now a regular eye chart the letters get smaller as you go down but I didn’t want to buy 4 packs of letters so I just stuck to one package. As you see all my letters will be the same size but you can buy smaller letters to get that true eye chart effect. You will need three sizes. Large , medium and small.
“There is nothing more rare, nor more beautiful, than a woman being unapologetically herself; comfortable in her perfect imperfection. To me, that is the true essence of beauty.” Steve Maraboli
It’s refashion Monday! Me and Mo are back with another great DIY for ya! Today we are going to tackle the varsity sweater. You can check out how Mo’s DIY turned out here whoisthatgirlmo.blogspot and check out mine below!
Things you need:
Iron on Letter
Iron on Patches
Lay your cardigan flat and position your letter in spot you like.
Read and follow the instruction to adhere your initial to your cardigan.
Lay your sleeve out flat with back side facing up. Mark with a stick pen your elbow position. Try your sweater on first to find the spot your elbow
Make a pattern , out of some scrap paper, for your elbow patch before cutting your iron on patches. You can make an oval like mine or another shape like hearts. Place on your sleeve to be sure it fits.
Cut two patches using your pattern. Then use your iron to press into place on both arms of your cardigan.
Tadah! Look how great the elbow patches turned out!
This is a great way to add a personal touch to a plain cardigan or sweater and its No sew! Happy crafting! And don’t forget to check out Mo’s DIY!
Happy Monday! Today marks the second Refashion Monday with yours truly and Mo from who is that girl Mo?. Today we are going to refashion a sweatshirt two ways. The sweatshirt is back better than ever. Your days of lounging around in that oversized plain sweatshirt are over. Now you can be cozy while still looking stylish. But before you run out and buy you one let me show you how to DIY one of your own. I blinged mine out with gems while Mo studded and added zippers to hers. Check out how Mo put hers together here whoisthatgirlmo.blogspot.com and check out my tutorial below:
Things you need
Sew on gems
Needle and thread
Lay out your gems in a design you like.
Thread your needle then start sewing your gems in place. I glued mine into place, with fabric glue, then went back and sewed them down.
Ta dah! It took me about 45min to get all the gems sewn but the end results are worth it. We had 90 degree weather when I took this picture, since its still very hot in Texas, but I can’t wait to sport it soon as the weather turns chilly.
This wonderful DIY is all thanks to rihanna and her killa style. I spotted a pic of her rocking this distressed denim skirt, denim shirt, heels, and a baseball hat. The whole outfit was hot so,I saved the pic and hunted down this high waisted denim skirt at the thrift store. After I chopped and screwed it I love how it turned out. Take a look how to shred your skirt below!
High grit sand paper
Mark with a pencil where you want your rips to go. Remember less is more. Don’t go too crazy!
Slide a piece of cardboard between your skirt before cutting. Slit you skirt where you made your marks with your box cutter. Take your seam ripper and start pulling out the white horizontal lines.
With your sandpaper rub over your belt loops, waistband, bottom hem and pockets. It will slowly rub away the denim giving it a worn look.
Throw it in the washer and dryer to fray all your cuts. Viola! A super Fab denim skirt.
The Normaluisa 2012 summer/spring collection is where I first spotted these chain straps. Models strutted down the runway with platform shoes and chunky chain anklets. A clever trick to give an illusion of a chain strap. This genius idea gives you chance to pair the anklets with multiple shoes! This DIY may be a year late but late is better than never! Right?
Check out the tutorial below!
Things you need:
1/2 yard of large curb chain
4 jump rings
2 lobster clasp
1. Measure your ankles and cut chain to fit.
2. Use your pliers, connect your lobster clasp to the end of your chain and attach a jump ring to the opposite end. Repeat steps on the second chain.
3. Your clasp should fasten to your jump ring at the opposite end.
That’s it! Three easy steps! Just one thing left to do! Grab your pumps and rock your chain straps!!